Dylco Electric logo with blue text and electric plug graphic
Electrician working on a smart home system with illuminated modern home exteriors and a contemporary kitchen interior
HomeServicesSmart Electrical Panels
SPAN · LUMIN · SCHNEIDER & MORE · WESTFIELD, IN

Smart Electrical Panels in Westfield, IN | Dylco Electric

Dylco Electric installs smart panels and smart load centers that bring circuit-level monitoring, app control, and automatic load management to your home — SPAN, Lumin, Schneider Square D, Eaton, and Leviton. Licensed, insured, and trusted since 2004.

317-896-1328
Licensed & InsuredEst. 20044.9★ Google RatingApp Setup IncludedPermit & Inspection HandledWestfield, IN
Quick Summary

A smart electrical panel replaces your breaker box with the same UL-listed overload protection plus circuit-level metering, app-based remote control, and automatic load management — so you can see exactly what your home is using, switch circuits from your phone, and often add an EV charger or heat pump without paying for a full service upgrade. Dylco Electric installs SPAN, Lumin, Schneider Square D, Eaton, and Leviton systems in Westfield, IN — load calculation, permit, install, and full app setup — usually in a single day on site. Licensed, insured, and rated 4.9 stars on Google. Call 317-896-1328 or request your free on-site quote below.

What Is a Smart Electrical Panel, and Do You Need One?

A smart electrical panel is your home's main breaker box with circuit-level metering, Wi-Fi connectivity, and app control built in. It provides the same UL-listed overload and fault protection as a standard panel, and adds three things a normal panel simply can't: real-time energy monitoring for every individual circuit, remote on/off switching from your smartphone, and automatic load management that sheds or schedules lower-priority circuits before the main breaker trips. Some systems replace the whole panel; others are load-management modules installed alongside your existing panel. You need one when you want to actually see and control what your home is using — or when you're adding an EV charger, heat pump, or batteries and want to avoid the cost of a full service upgrade.

Woman holding a smartphone with a smart home electricity usage app, monitoring and analyzing energy consumption for her home

A smart panel shows live per-circuit usage and lets you control every circuit from an app — not just trip breakers on a fault.

Smart Panel vs Standard Panel: What Changes for Your Home

Both keep your home safe and code-compliant. The difference is what a smart panel can do with the power flowing through it. Here's how they compare at a practical, house-by-house level.

Standard Panel

  • Overload and fault protection — but it only reacts after something goes wrong
  • No energy visibility at all — you can't see what's using power
  • Manual control only — walk to the box to flip a breaker
  • No load management — a big load trips the main breaker
  • Adding an EV charger or heat pump often means a costly service upgrade
  • Backup power needs a separate transfer switch and critical-loads subpanel

Smart Panel

  • Same overload and fault protection — and it can prevent the trip before it happens
  • Real-time per-circuit energy usage on your phone
  • Remote on/off control of any circuit from anywhere
  • Automatic load shedding and scheduling of lower-priority circuits
  • Often adds an EV charger or heat pump on existing service — no upgrade needed
  • Backup priorities set in software, replacing the critical-loads subpanel

If the internet goes out, your power stays on. A smart panel is a UL-listed breaker panel first — overload and fault protection are hardware functions that work with or without a connection.

Smart Panel Options We Install in Westfield

A smart panel is the right answer for many homes, but there's more than one way to get there. We install full smart panels and smart load-management modules — and we'll tell you honestly which one your home actually needs after a free load assessment.

Full Smart Panel Installation

SPAN, Schneider Square D Energy Center, Eaton, and Leviton full-panel systems replace your existing service panel with circuit-level monitoring and app control for the whole home.

Smart Load Management Modules

Lumin and similar modules pair with your existing panel to add controllable circuits and backup prioritization — smart capabilities without replacing the panel.

Smart Panel + 200A Service Upgrade

The combined package for homes that need both added capacity and circuit-level control — a smart panel on a modern 200-amp service.

EV Charger Load Management

A smart panel that automatically manages Level 2 EV charging against total household load, often letting you add a charger without a service upgrade.

Solar & Battery Backup Integration

Circuit backup priorities and outage runtime management for homes with solar and storage — and no separate critical-loads subpanel required.

App Setup & Circuit Mapping

Wi-Fi connection, circuit labeling in-app, load priority configuration, and a full homeowner walkthrough on every install.

Who Should — and Shouldn't — Install a Smart Panel

A smart panel is a serious upgrade. It's worth it for some homes and not for others — here's the honest breakdown, based on the homes we actually see in Westfield.

A strong fit

  • You want to add an EV charger or heat pump but want to avoid a costly service upgrade
  • You have solar and battery backup and want smart outage priorities instead of a subpanel
  • You're a multi-EV household or all-electric home that needs real load control
  • You want to actually see where your energy goes, circuit by circuit
  • Your panel is aging and due for replacement anyway — smart is marginal over standard

Not always worth it

  • You only want monitoring with no new large loads planned — a whole-home monitor costs far less and may suffice
  • Your panel is physically out of space or badly undersized — that needs a conventional service upgrade first
  • You don't plan to manage or schedule loads and just want the safety of a current panel

Not sure which side your home is on? The decision happens in the free on-site assessment. Dylco runs a real load calculation and gives you a straight answer — buy the smart panel, upgrade the service, or do nothing at all.

How a Smart Electrical Panel Install Works

From the first assessment to the last circuit labeled in your app, here's the process end to end — usually finished in a single day on site.

1

Free On-Site Assessment & Load Calculation

We inspect your panel, meter base, and grounding, then run a load calculation based on what your home uses — and what you're planning to add. You get a firm written quote and a straight answer on whether a smart panel, added capacity, or both is the fix.

2

System Selection & Written Quote

We match the system to your home — SPAN, Schneider Square D, Lumin, Eaton, or Leviton — and give you a firm written quote covering equipment, labor, permit, and setup. No surprises later.

3

Permit & Utility Coordination

Dylco pulls the required Westfield electrical permit and schedules the utility disconnect and reconnect when the job includes a service change, so everything lands on the same day.

4

Installation On Site

Our licensed electricians install the smart panel or load-management module, typically in a single day, with power off for part of it. Panels are energized and checked before we leave.

5

Inspection, App Setup & Walkthrough

We coordinate the city inspection, connect the panel to Wi-Fi, map and label every circuit in the app, set load priorities, and walk you through controlling your home from your phone.

Why Choose Dylco for Smart Panel Installation in Westfield

Smart panels are still new enough that a lot of contractors talk a good game and hand off the hard part — the load math, the permit, the app setup — to someone else. Dylco installs them end to end, in-house: real load calculation, proper permit and inspection, and a fully mapped, working app you're actually shown how to use. Family-built, Westfield-based, and rated 4.9 stars on Google since 2004.

Licensed, Bonded & Insured

Indiana electrical contractor since 2004 — we pull every permit on every job

4.9★ on Google

20+ years serving Westfield and Central Indiana homeowners

Real Load Calculation

Never upselling a smart panel you don't actually need — we tell you honestly

Full App Setup

Wi-Fi, circuit mapping, and load priorities configured on every install

Permit & Inspection Handled

Westfield permit and city inspection coordinated for you

Same-Day Response

We move fast when your electrical situation can't wait

Smart Electrical Panel FAQs for Westfield, IN Homeowners

How much does a smart electrical panel cost in Westfield?
Smart panel equipment generally runs from around $2,500 for a load-management module that works with your existing panel up to $8,000 or more for a premium full-panel system, plus installation, permit, and any panel or service work the job requires. The spread is wide because the systems are genuinely different. Dylco gives you a firm, written quote after a free on-site assessment.
What is the difference between a smart panel and a regular electrical panel?
A regular panel distributes power and trips a breaker on a fault. A smart electrical panel does both of those and adds circuit-level metering, remote on/off control from an app, and automatic load management. Practically, a standard panel tells you nothing and controls nothing remotely; a smart power panel shows you every circuit's usage and lets you manage it from your phone.
Can a smart electrical panel help me avoid a service upgrade?
Often, yes. By automatically shedding or scheduling lower-priority loads, a smart panel lets a home add an EV charger, heat pump, or hot tub without exceeding existing service capacity — which can save thousands versus a full service upgrade. It isn't universal, though. Dylco runs a load calculation first and tells you honestly whether managing demand is enough for your home.
Do smart electrical panels save money on your electric bill?
Indirectly. A smart panel doesn't reduce consumption by itself — it shows you exactly which circuits are driving your bill and lets you act on it, and it can shift heavy loads like EV charging into off-peak hours if you're on a time-of-use rate. Most of the savings come from avoided service upgrades, caught problems, and smarter scheduling rather than the panel itself.
Can I install a smart electrical panel myself?
No. Replacing or modifying a home's main service panel is licensed electrical work in Indiana, requires a permit and inspection, and involves live service conductors that can be fatal to handle. It also voids most manufacturer warranties. Dylco is a licensed, insured Indiana electrical contractor and handles the permit, the utility coordination, and the inspection as part of the job.
Do I need a permit for a smart panel installation in Westfield, IN?
Yes — replacing or altering a service panel requires an electrical permit and inspection in Westfield, and the work must be performed by a licensed electrical contractor. Dylco pulls the permit, coordinates the inspection, and handles utility disconnect and reconnect scheduling when the job includes a service change, so you're not dealing with the city yourself.
What happens to a smart panel if the Wi-Fi or internet goes out?
Your power stays on. Smart panels are UL-listed breaker panels first — overload and fault protection are hardware functions that work with or without a connection. If the network drops, the panel keeps distributing and protecting power normally; you temporarily lose app visibility, remote switching, and some automated load management until it reconnects.
Does a smart electrical panel work with solar panels and battery backup?
Yes, and that's where these systems are strongest. A smart panel routes solar, battery, and grid power intelligently and lets you set exactly which circuits stay powered during an outage and in what order — so one battery covers your essentials far longer. It also replaces the separate critical-loads subpanel a traditional backup install usually requires.
Can a smart panel manage an EV charger?
Yes. Managing EV charging is the single most common reason Westfield homeowners install one. The panel monitors total household demand and automatically pauses or slows charging when other large loads are running, then resumes when capacity frees up — which is often what makes a Level 2 charger possible without a service upgrade.
Which smart electrical panel is best for a home?
There isn't one universal best. SPAN and Schneider Square D lead on full-panel control and solar/battery integration, Lumin is the most cost-effective add-on for an existing panel, and Leviton and Eaton offer strong monitoring at lower price points. The right choice depends on your service size, circuit count, and whether battery backup is in your plans — Dylco matches the system to the home.
Do you install smart electrical panels outside of Westfield?
Yes — in addition to Westfield, Dylco installs residential smart electrical panels across Carmel, Noblesville, Fishers, Zionsville, and the greater Indianapolis area.

Adding a Level 2 EV charger or service panel upgrade? A smart panel or load-management module can often make it possible on your existing service — request a free assessment below.

See Your Whole Home's Energy in Your Hand

Whether you want circuit-level control, a way to add an EV charger without a service upgrade, or smarter backup priorities with your batteries — Dylco Electric installs smart panels in Westfield start to finish. Get your free on-site quote or call us directly.

Call 317-896-1328

Free quote · Same-day response when possible · Licensed & insured · 4.9 ★ on Google